Mold Remediation in Suwanee and Gwinnett County

Mold Remediation That Fixes the Cause, Not Just the Stain

Mold remediation is the full job of finding mold, removing it, cleaning the spores out of your home and air system, and fixing the moisture that let it grow. Fresh Cleaning Solutions does mold remediation for homes and businesses in Suwanee, Lawrenceville and across Gwinnett, Forsyth and North Fulton.

Wiping a black spot off the wall is not the same thing. Mold removal on its own takes care of what you can see. Remediation goes further. It deals with the growth you cannot see, the spores floating through your ducts, and the damp spot that will grow it all back if nobody fixes it.

That is why we treat mold as an air quality problem, not a paint problem. We test first, remove the growth, clean the air system it has spread into, and control the humidity that fed it. Fixing the cause is how you know the job will hold instead of just hoping it does. Our guide to mold in air ducts covers the signs it has reached your system.

We have served North Atlanta homeowners since 2016, and we are open 24 hours a day, 7 days a week. Call (678) 609-8713 and we can often be at your door the same day.

Signs You Need Mold Removal

Mold rarely announces itself with a big patch on the living room wall. In Gwinnett homes it usually shows up in smaller ways first:

• A musty smell that gets stronger when the AC kicks on
• Dark spots on vent covers, ceiling corners or around supply registers
• A damp, heavy feel in the house through humid Georgia summers
• Allergy or sinus flare-ups that ease when you leave home
• Wet insulation, sweating ducts or a damp crawl space
• A leak, a flood or a plumbing problem that was not fully dried

Where Mold Hides in North Atlanta Homes

The mold you can see is usually the smallest part of the problem. These are the spots we check on every inspection:

• Crawl spaces. Damp soil and summer humidity keep the air under your floor wet, and that air gets pulled up into the house.
• Attic and crawl space ductwork. Cold ducts running through hot, humid spaces sweat, and the moisture feeds mold inside and outside the lines.
• The AC coil and drain pan. Your evaporator coil is wet every time the AC runs. Dust on that wet coil is an easy home for mold.
• Bathrooms, laundry rooms and under sinks. Slow leaks and poor venting keep these rooms damp long after a shower or wash.
• Behind walls after a leak. A pipe or roof leak that was patched but never fully dried can grow mold for months before you notice.

Not sure what you are dealing with? Get a mold test first. Our mold testing and inspection tells you if mold is present, where it is and how much is in the air. If the results come back clean, you saved yourself a remediation job. If they do not, you know exactly where the mold is and what the remediation needs to cover.

Our Mold Remediation Process, Step by Step

Every mold remediation job follows the same process, so you know what is happening in your home at each stage.

1. Free inspection, then a mold test. We find the growth, measure the air and check humidity. You get a flat-rate quote with no hidden fees.
2. Contain the area. HEPA air scrubbers run the whole time. We close off the affected space so spores do not spread to clean rooms while we work.
3. Remove the mold. We take out the growth and the damaged material it has rooted into.
4. Clean the air system. Mold spores travel through your HVAC. We inspect the ducts and vents, then clean them with a HEPA-filtered negative-air machine and rotary brushes. See our air duct cleaning and AC coil cleaning services.
5. Sanitize and deodorize. We apply an EPA-registered sanitizer and deodorizer to kill what is left and clear the musty smell. Learn more about duct sanitizing and odor removal.
6. Fix the moisture. We show you what caused the mold and set up the fix, from a dehumidifier to crawl space encapsulation.

We take photos at each stage, and we do the same work for commercial spaces as we do for homes. Our sanitizer and process are safe for kids and pets once the job is done.

That last step, fixing the moisture, is the one most mold companies skip. It is the reason our customers can sleep in the room again without wondering.

Stop Mold From Coming Back

Mold needs moisture. In North Atlanta, moisture is easy to find. Our summers are long and humid, and many homes around Suwanee, Buford and Dacula have crawl spaces and attic ductwork that stay damp for months. If you remove the mold and leave the humidity, it grows back.

We close that loop with the same crew that did the remediation:

• Whole-house and crawl space dehumidifiers pull the extra water out of the air.
• UV lights and whole-home air purifiers help keep mold from growing on your AC coil.
• Crawl space encapsulation keeps damp crawl space air from getting pulled into your home.

Want a full picture before you decide? Our home air quality testing measures particles, humidity and VOCs across the whole house.

A Flat Rate Up Front, After a Free Estimate

A small patch under a sink and a moldy crawl space are very different jobs, so we do not guess. We look at how much mold there is, where it is and what it has damaged, then quote one flat rate up front after a free estimate, with no hidden fees. Check our current specials too.

Why Gwinnett Homeowners Choose Fresh

• Locally owned in Suwanee since 2016
• 4.9 stars from 501 Google reviews
• Open 24 hours, 7 days, with same-day service
• Flat rates and 100% satisfaction or your money back
• Safe for kids and pets